dump valve
never had the recirc. got a hks dv. runing a fmic .got a boost problem,not holding boost 1.8 dropping to 1.5 been told it could be inlet hose .getting a new one from mark at lateral, his has all the small pipes on the side of it removed so just a straight through pipe ,so can not fit recirc on to it .as the dv is old ,going to replace it with a new one just to make sure there is no problem with it
Scooby Senior
iTrader: (3)
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
Has seen 2 bar of boost now and then...

dunx
P.S. I fitted the strongest spring from the service kit so it ONLY works at WOT under serious abuse, round town it's as good as a blanking plate. IMHO.
Trending Topics
I'll 2nd that dunx.
Just sold it after 3 years of faultless service
Bat, your running without a dump valve arent you iirc? Does that affect the map on the PP chip? Ive binned my baileys, just want to make sure its will be ok running a dv delete on the PP chip.
Nothing noticeable musso. As i said, it only vented on WOT(ish) anyhoo so will/should not effect open loop running, and i still get pops on gear changes

I will get it logged when the weather/time permits, but only expect a tiny change if any at all.
(i still have the OE in the shed should i need it)
Yeah you remember correctly.
Nothing noticeable musso. As i said, it only vented on WOT(ish) anyhoo so will/should not effect open loop running, and i still get pops on gear changes
I will get it logged when the weather/time permits, but only expect a tiny change if any at all.
(i still have the OE in the shed should i need it)
Nothing noticeable musso. As i said, it only vented on WOT(ish) anyhoo so will/should not effect open loop running, and i still get pops on gear changes

I will get it logged when the weather/time permits, but only expect a tiny change if any at all.
(i still have the OE in the shed should i need it)Yeah you remember correctly.
Nothing noticeable musso. As i said, it only vented on WOT(ish) anyhoo so will/should not effect open loop running, and i still get pops on gear changes
I will get it logged when the weather/time permits, but only expect a tiny change if any at all.
(i still have the OE in the shed should i need it)
Nothing noticeable musso. As i said, it only vented on WOT(ish) anyhoo so will/should not effect open loop running, and i still get pops on gear changes

I will get it logged when the weather/time permits, but only expect a tiny change if any at all.
(i still have the OE in the shed should i need it)Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Wheels And Tyres For Sale
0
Sep 29, 2015 02:18 PM









