WHEEL OFFSET QUESTION...???
#1
WHEEL OFFSET QUESTION...???
What's the lowest offset ET?? that you can run in the Classic GC8 4-door bodyshell, without resorting to rolling/cutting arches?
This would be running 7J x 17" alloys with 215/40 tyres... Plus -1.5deg camber all round (should help a bit)...
This would be running 7J x 17" alloys with 215/40 tyres... Plus -1.5deg camber all round (should help a bit)...
Last edited by joz8968; 12 December 2010 at 01:53 PM.
#6
Cheers you two.
My wheels are actually near-OEM spec ET45... But just wanted to know, in case I have to fit spacers greater than 5mm thick - i.e. 8mm ones and longer studs - for when I fit a 330mm big brake kit.
I prob won't need the spacers... but thought I'd better ask.
My wheels are actually near-OEM spec ET45... But just wanted to know, in case I have to fit spacers greater than 5mm thick - i.e. 8mm ones and longer studs - for when I fit a 330mm big brake kit.
I prob won't need the spacers... but thought I'd better ask.
Last edited by joz8968; 14 December 2010 at 03:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM