Codes showing 32 and 23 on subaru
#1
Codes showing 32 and 23 on subaru
My subaru is showing codes 32 and 23 lambda sensor and maf sensor but my lambda sensor as been removed due to it been decated so this code will show but will it show code for the maf if theres no lambda sensor, duz it affect it. The car as been splutering and losing power lately but only sometimes not all the time ive been told its definatley the maf but just wanted to b sure b4 i buy 1.
#2
Scooby Regular
iTrader: (8)
My subaru is showing codes 32 and 23 lambda sensor and maf sensor but my lambda sensor as been removed due to it been decated so this code will show but will it show code for the maf if theres no lambda sensor, duz it affect it. The car as been splutering and losing power lately but only sometimes not all the time ive been told its definatley the maf but just wanted to b sure b4 i buy 1.
The symptoms do sound like the MAF is failing and if the error codes shows it then that would support it.
#4
Scooby Regular
iTrader: (8)
Now put down the doobie and change the MAF and the Lambda.
#5
Yes, of course a failing Mass Air Flow sensor will cause running issues. As the ECU 'learns on the fly' and knows the MAF is on its way out, it will do all it can to compensate and allow the engine to run. But the day will come, it will either NOT run at all, or go BANG!
Now put down the doobie and change the MAF and the Lambda.
Now put down the doobie and change the MAF and the Lambda.
#6
Scooby Regular
iTrader: (8)
In short you NEED a lambda.
Check your downpipe and/or the drivers side header and i bet you see it with 3 wires coming from it.
I don't know any one that does NOT run a lambda.
Last edited by Glowplug; 06 December 2010 at 10:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM