DEANO1969

iTrader: (1)

Going to change the TD04 from my2002 bug eye WRX swap it for a front entry TD05, got everything now.

Question???
Can i just change the turbo or will the housing have to be changed too. Thanks Chaps!

my94wrx

iTrader: (4)

you will need a front entry tdo5 turbo compressor cover other than that, you should be good to go.

joz8968

iTrader: (13)

If it has a front entry comp housing - or if its an OEM MY93-96 one with the FE mod done - then it's a straight swap.

But I think you have to use the 05's own oil feed/drain pipes, as they're bigger???

Slowboy Racing

Straight swap, but remap needed.

DEANO1969

iTrader: (1)

Cheers Guys,
The TD05 is from a classic Import with a modded front entry convertion.
but the cast housing that it come with is damaged while being removed from the classic, plus I'd rather not take the one off my car if dont need too?

midnight

iTrader: (10)

It is a straight swap mate ,i 've changed 3 x td04's to td05's in the last 4 months.no need to change the oil feed pipes as they are the same size both ends,and both sleeve bearing turbos.Good solid turbo and as slowboy says after a remap & a few supporting mods ,you should see good power gains.

DEANO1969

iTrader: (1)

Brilliant Lads

didnt fancy lying under the car in this weather. shouldnt take that long to swap, what ya reckon??

midnight

iTrader: (10)

If you take your time,and soak the nuts in wd40 overnight ,should not take you more than a couple of hours. I found that when i warmed the engine up 1st that the nuts came off a lot easier than trying to take them off from cold.

95turbowagon

iTrader: (17)

edited found answer to my question.