front entry turbo 90 degree pipe delete
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
front entry turbo 90 degree pipe delete
what is the best way an cost of the above mod i wish to remove the 90 degree bend in the pipe from my turbo by lifting the manifold up an feeding the new pipe from the turbo 20g under the manifold to the maf sensor an air filter
if that makes sence car is a my93 cdb wrx
thanks ste
if that makes sence car is a my93 cdb wrx
thanks ste
#6
Scooby Regular
iTrader: (13)
I have a MY97/98 inlet manifold, the turbo pipe! , and also the MY97-00 PAS pump/res. assembly, if you want to do it properly .
The MY97/98 "phase 1.5" manifold is a direct bolt-on and affords more space for the turbo pipe to pass under (but you won't even have to worry about that, as the hose is still attached to the IM, etc. Also has all the ancilliaries attached inc. the 440cc yellow injectors!
If you need all/any of these items (or just the PAS), just get in touch...
The MY97/98 "phase 1.5" manifold is a direct bolt-on and affords more space for the turbo pipe to pass under (but you won't even have to worry about that, as the hose is still attached to the IM, etc. Also has all the ancilliaries attached inc. the 440cc yellow injectors!
If you need all/any of these items (or just the PAS), just get in touch...
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM