front fogs not working after hd kit fitted
#1
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: manchester
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
front fogs not working after hd kit fitted
as above!
just a quick one guys, fitted a hd head lamp kit , dead simple plug and play , it's on a rb5 so it's got the fog relay on cross member, when hd kit fitted fogs not working ....
put the original bulb back in on nearside and hey presto the fogs work again....
do i just need to wire the switched feed to relay before the hd kit , i.e take it from the original loom before it plugs into the hd kit ....
any suggestions will be helpful
just a quick one guys, fitted a hd head lamp kit , dead simple plug and play , it's on a rb5 so it's got the fog relay on cross member, when hd kit fitted fogs not working ....
put the original bulb back in on nearside and hey presto the fogs work again....
do i just need to wire the switched feed to relay before the hd kit , i.e take it from the original loom before it plugs into the hd kit ....
any suggestions will be helpful
#2
Scooby Regular
iTrader: (2)
If it has a fog relay, they probably aren't fogs, but driving lights. Did they used to come on with main beam?
IIRC, the cure is to trigger the relay from the UNUSED headlight connector, you may have to try it on all three wires before settling on whichever makes it work.
IIRC, the cure is to trigger the relay from the UNUSED headlight connector, you may have to try it on all three wires before settling on whichever makes it work.
#5
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: manchester
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
ok sorted it... cut and rewired the feed to relay to the dip beam wire on original loom , and removed permanent earth from relay and wired to switch earth on orginal head lamp loom
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM