When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If we are talking back box only, I believe it will as its the same shape as the STi one only with twin pipes instead of single 3" exit. The only barrier to fitment between newages (backbox only) is the rear diffuser which prevents the fitment of some jap exit back boxes.
As said above it will fit providing it is not an angled exit backbox going onto a 2007 Hawkeye STi(rear diffuser fouls),or a GB270 model(rear lip fouls),if it is a straight exit backbox will go straight on all models.
Thanks for the help, but what about if it's not just the back box? It's the complete system?
Then no it wont fit.
Downpipe is different as the JDM is twin scroll, the bug you have has 3 parts to its exhaust I believe, the hawk eye has 4, so you end up short (actually this goes for the MY05 blob too).
You will need to buy a new exhaust system to fit.
The previous OP's full system would have fit too btw - it is just an issue when fitting half systems to hawkeyes as the downpipe is a different length. Swapping the whole lot out is not an issue.
The previous OP's full system would have fit too btw - it is just an issue when fitting half systems to hawkeyes as the downpipe is a different length. Swapping the whole lot out is not an issue.
Cheers Duncan,
My main concern was the turbo fitment, I currently have a VF35, and not knowing what this was bolted to before that made me wonder if it might be different? I also thought the hangers might be in a different place?
My main concern was the turbo fitment, I currently have a VF35, and not knowing what this was bolted to before that made me wonder if it might be different? I also thought the hangers might be in a different place?
Thanks,
Rob
Hello guys and gals,
I could do with this answering definitely please, anyone?
My main concern was the turbo fitment, I currently have a VF35, and not knowing what this was bolted to before that made me wonder if it might be different? I also thought the hangers might be in a different place?
Thanks,
Rob
Hi Rob i have fitted full exhaust from Classic(downpipe,center pipe,Nur Spec) and fit perfectly,yes hangers are different,but with little bit modification is possible fit everything.Maybe help you mine answer.
Hi Rob i have fitted full exhaust from Classic(downpipe,center pipe,Nur Spec) and fit perfectly,yes hangers are different,but with little bit modification is possible fit everything.Maybe help you mine answer.
Jura
Cheers Jura,
Im more concerned of the downpipe fitment to the turbo then anything else. Will the flange fitting be the same to my VF35, soon to be MD321 or 20G?
Im more concerned of the downpipe fitment to the turbo then anything else. Will the flange fitting be the same to my VF35, soon to be MD321 or 20G?
Rob
Hi Rob standard fitment is same like on MD321 or 20g(on these turbos you can fit any normal exhaust which you have now on VF35),in this i'm pretty sure,different is just on Twin Scroll setup,Garret twisted/rotated setup.
Jura
Last edited by jura11; 09 January 2011 at 05:08 PM.