Prosport Guage peobem (flashing)
26 June 2010, 02:53 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2008
Location: Sheffield
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Prosport Guage peobem (flashing)
ive just wired up my prosport guages and wanted to try one so connected it up with just the ignition on, the power and sender unit plugged in when they finished their start up process the light was just flashing on and off. Anyone had this problem? I tried another guage to make sure it wasnt just that one and that was the same.
26 June 2010, 02:58 PM
#2
Scooby Regular
iTrader: (2)
Join Date: Dec 2006
Location: oxfordshire
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
no signal from the senders.if its oil pressure it will flash till its running.I would just check all the connections as they arent the greatest,just check all the little connectors on the back are firmly pushed in.
Last edited by wayner845; 26 June 2010 at 03:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
