Indicators
25 June 2010, 06:01 PM
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Feb 2010
Location: Canterbury
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Indicators
Can anyone help??
Went to get an MOT today and everything worked fine on the way. After I handed over the car and waited the man told me that the indicators didn't work. So drove home to have a look.
I took the rocker switch out and replaced it with another I had but still no luck. So I tried just touching the wires to see
if I could get them to work. They work when connected to the power but stay on as the signal wire seems to be the problem.
The hazard lights and idicators when the alarm is activated work
so does anyone have a wiring diagram so I can trace the wires.
If I can't get to work I'll have to hard wire in a toggle switch to the relay to get them to work
thanks in advance
Went to get an MOT today and everything worked fine on the way. After I handed over the car and waited the man told me that the indicators didn't work. So drove home to have a look.
I took the rocker switch out and replaced it with another I had but still no luck. So I tried just touching the wires to see
if I could get them to work. They work when connected to the power but stay on as the signal wire seems to be the problem.
The hazard lights and idicators when the alarm is activated work
so does anyone have a wiring diagram so I can trace the wires.
If I can't get to work I'll have to hard wire in a toggle switch to the relay to get them to work
thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM