Toad a101 alarm and adding an aux device like a boot popper
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 1,095
Likes: 0
Received 0 Likes
on
0 Posts
Toad a101 alarm and adding an aux device like a boot popper
Hi does anyone know if this is possible to do as a DIY job? I want to wire in a boot popper on one of the key fob buttons, i know its possible but is it a garage / professional job only?
I found this:
http://i164.photobucket.com/albums/u...tu/toad101.gif
Dave
I found this:
http://i164.photobucket.com/albums/u...tu/toad101.gif
Dave
#3
you really need to know what alarm it is,
either way, depending on how handy you are with a soldering iron and strippers etc then yes they can be self fitted,
if it is a ai606 then if you fit it yourself it wont be insurance approved,
yes the boot popper is easily achieved, wiring it in using a relay is fairly straight forward.
either way, depending on how handy you are with a soldering iron and strippers etc then yes they can be self fitted,
if it is a ai606 then if you fit it yourself it wont be insurance approved,
yes the boot popper is easily achieved, wiring it in using a relay is fairly straight forward.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM