Hi Guys need a little help with my Bug eye ...

the passenger door window has decided to cease to work properly any more im guessing something with the mechanism has gone wrong as it goes up at angles either too far or too little and never sits in the right place ......

firstly anyone had this problem before

secondly how the hell do you get the door cards off without breaking them ?? ive only found 2 screws and after taking both them out its still pretty rigid !!

Many thanks Sinner!

 

I took my drivers side door card of the other day, pretty simples, remove the screw that sits in the little compartment that you hold when you close the door, remove the electric window panel (full plastic section) and under neat that you will find another screw, remove this to, once you have done this get hold of the bottom left hand side corner and give it a pull, this should realise the first clip, work your way round by unclipping the same way,


Once you remove the card you will see what the problem is, I had the same problem just had to buy some washers and tighten up the nuts that hold the mechanism and runners in place.

Hope this helps.

 

..... anyone??

 

My advise not good enough lol!!!

 

dunno how similar it is to the classic mechanism mate. but mine was goin up uneven n a little noisy on the drivers side. wen i took the door card off the runner on the cross frame had popped out n just needed put back in. other than tht not really sure man. hope it helps

 

cheers biggi got it off wasnt too nice inside ... seems the bolts have decided to make themselves a wider area to sit in that and 2 bolts had worked there way out :-(...

 

Yh same here, tis very strange

 

More trouble this time number plate fixings ... Both plastic screws sheared anyway of getting to the nuts that are in the bumper??

 

No help this time ....