every1sgottablue1

As above, where are they please. Getting a bit of smoke on boost so thought I would try this first.

Thanks. (picture if poss, try to make it idiot proof! LOL)

Lee.

Splitpin

The head breathers exit through the black plastic blocks at the upper rear of the rocker covers. If you look in this area you'll see where the rubber hoses run up to a metal one bolted to the underside of the inlet manifold.

Crankcase breather is underneath where the Y-pipe connects to the turbo compressor outlet, and splits into two, one to the PCV valve and the other to the inlet pipe.

If you're trying to rule in/rule out significant quantities of oil being dumped out of the vent system, pretty much the best way of doing so is via a compression/leakdown test.

every1sgottablue1

Thanks Mate!