Brembo 4 pot front brakes (pcd 114) on 2005 sti. Removal problem
27 March 2010, 11:19 AM
#1
Scooby Newbie
Thread Starter
Join Date: Jun 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Brembo 4 pot front brakes (pcd 114) on 2005 sti. Removal problem
Hi
trying to change the discs on front wheels. when i try and remove the top 19mm bolts on the back of the calipers there is another bolt which is part of the steering mechanism which is preventing its full removal. Are there any ways round this or do i have to remove this other bolt. Its around 23mm. any advice would be a winner
ratty
trying to change the discs on front wheels. when i try and remove the top 19mm bolts on the back of the calipers there is another bolt which is part of the steering mechanism which is preventing its full removal. Are there any ways round this or do i have to remove this other bolt. Its around 23mm. any advice would be a winner
ratty
27 March 2010, 03:01 PM
#3
Scooby Newbie
Thread Starter
Join Date: Jun 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I had to take the other bolt out. Seems a bit of poor design. Most important tool was the 24 inch breaker bar. Genious. Even with the strength of ten bears those bolts wouldn't have budged
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
