Turbo banjo bolts? urgent
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Oct 2007
Location: In the car
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Turbo banjo bolts? urgent
as above does anyone know the diameter and pitch of the oil feed pipe banjo bolts on a 94 impreza, presume classics are all the same? or if anyone has them with washers would sell them? quite an urgentr matter really lol
thanks for any help
james
thanks for any help
james
#2
Scooby Regular
iTrader: (5)
Join Date: Jan 2010
Location: Ossett
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
the oil feed as 2 different sized banjo bolts one (the larger of the two) goes into the cyl head the other goes into the top of the turbo, which do you need? also if it's the smaller turbo end banjo you may need a restrictor banjo depending on what turbo you have fitted, ball bearing turbos don't need as much oil through them so the banjo bolt have a smaller hole (1.2mm) which provides a 'mist' of oil rather than the unrestricted flow of non ball bearing turbos.
Last edited by budd; 26 March 2010 at 08:22 PM.
#4
Scooby Regular
iTrader: (1)
Join Date: Apr 2005
Location: In the Flatlands of Lincolnshire
Posts: 2,892
Likes: 0
Received 0 Likes
on
0 Posts
Probably best option is to get in touch with Scoobyclinic, Scooby world, etc. They sell the turbo's so should be able to either give the information required or supply the parts.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM