re-fitting my front mount flipped help please
#1
re-fitting my front mount flipped help please
hi all
i currently have a front mount fitted to my98 v4 car and am thinking of re-mounting it the other way up so the pipes come in and out the top not the bottom and exit/enter under the headlights instead of via the inner wings which will save quite a bit of pipe and look a lot better in my opinion.
i did think of rotating my manifold but have decided to just port it a bit and fit some spacers to help keep it cool as i like my creature comforts too much like the air con.
could someone tell me exactly what i would need to do and how difficult it is.
ie; i know the front support bar has to come off but do i need to chop much away to fit the pipes through ?
thanks any coments or advice welcome.
i currently have a front mount fitted to my98 v4 car and am thinking of re-mounting it the other way up so the pipes come in and out the top not the bottom and exit/enter under the headlights instead of via the inner wings which will save quite a bit of pipe and look a lot better in my opinion.
i did think of rotating my manifold but have decided to just port it a bit and fit some spacers to help keep it cool as i like my creature comforts too much like the air con.
could someone tell me exactly what i would need to do and how difficult it is.
ie; i know the front support bar has to come off but do i need to chop much away to fit the pipes through ?
thanks any coments or advice welcome.
Last edited by TingTongPJ; 19 March 2010 at 05:43 PM.
#3
Scooby Regular
iTrader: (2)
Join Date: Sep 2007
Location: will be back in another scooby in time....
Posts: 2,554
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure a few peeps done it on 22b so look through there I'm sure u will find something, I wanted go do it but build cost went up a little so couldn't afford all the custom work
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM