what tmic is this?
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: ukscoobies.com
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
what tmic is this?
It has had the bolt on dv hole proffesionally alloy welded and the dv pipe alloy welded on. I t came of a 93 wrx but is not a standard tmic for these cars. I belive it to be a early sti tmic what do you think?
www.nottinghamshirescoobies.com
www.nottinghamshirescoobies.com
Last edited by scoobybry!; 04 March 2010 at 11:08 AM.
#6
Scooby Regular
iTrader: (13)
Defo a v.3/4 STi one with the OEM curved DV port on the extreme right (looking at the pic) grinded off and a plate welded over - you can just make it out in the pic.
Then someone's fabricated a 90-deg DV pipe for the opposite side. No doubt intended to be used on a MY93-96 car, where the DV needs to be on that side for a short path to the reirc port on the turbo intake pipe...
Then someone's fabricated a 90-deg DV pipe for the opposite side. No doubt intended to be used on a MY93-96 car, where the DV needs to be on that side for a short path to the reirc port on the turbo intake pipe...
Last edited by joz8968; 04 March 2010 at 06:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
hedgecutter
General Technical
3
25 September 2015 02:35 PM