Hi All.
Does somebody have a pic of how to mount a 3 port boostsolunoid on a my99-00.
Can You drive with it on the original ecu?
I have a link ecu but havent had in mountet yet.
Any help with the mount of the solunoid is welcome

Skassa

 

anybody?

 

hmmmm....wonder if I remember this correctly....bent pipe (top one), preassure in, from the turbo....middle one boost out to the WG....bottom pipe, outlet to be put into the intake.

/J

 

Thanks Jerry.
I will give it a go

Skassa

 

I must be a dum...
I cant figuere it out!.
Can someone please post a pic of it?.

Skassa

 

Bent pipe (which will be the top one when the solenoid is fitted) - boost preassure IN from the turbo nipple.

Middle pipe on the solenoid - control preassure OUT to the wastegate actuator (gold bell thingy).

Bottom, straight pipe - outlet from the solenoid to the inlet.

/J

 

Hmm I will try again.

Skassa

 

Hi
Shall i remove the t-piece between actuactor and turbonipple?
What about the restricter in the turbonipple pipe shall i put that in the new hose?.
Please help as i am doing it now.

Skassa

 

Yup, the T-piece is a goner...and reinstall the restrictor in the hose coming from the turbo outlet - watch out for any unwanted overboost peaks...if so...enlargen the hole in the restrictor or remove it.

/J

 

Many thanks Jerry.
You know your stuff.
Thanks alot ITS WORKING.

Skassa