boost2010

I want to know if my car has original ecu these are the numbers on it
Cheers b13 the numbers are

u8
22611 aab10
a18-000 rj2

I suspect it's not cause of dodgy wiring

cheers
chris

dj219957

u8 is indeed the correct ecu. take the lid off and make sure there is not a dodgy chip fitted in the bottom right corner.

wrxmad

hi there, i had an import 93 wrx it also had the u8 ecu in .Thats the correct one there. Its rated at 240ps.

dj219957

U8, 2C, W6, W9 - 1993/1994 WRX - 11.47psi
SA (STi chipped) - Ver1 STi (Sedan and Wagon) - 14.94psi
SB (STi chipped) - Ver1 STi-RA - 13.64psi
SC (STi chipped) - SAME AS Z4 - Ver2 STi Wagon - 12.78psi
Z4 - 1995/1996 WRX - 12.78psi
Z5 - 1995/1996 WRX-RA - 12.57psi
6K - Ver2 STi Sedan - 13.34psi
7K - Ver2 STi-RA - 13.19psi
Prodrive UK ECU (Prodrive Chipped) -- SAME AS 6K - 13.34psi
1C, 3B, V9, V5 - All WRX Wagons 10psi, dropping to 6.8psi
V7, 7D, 6D - 1993 to 1996 UK/Euro 11.47psi

boost2010

Thanks everyone. So i have the right ECU can anybody explain this dodgy wiring. Why would somebody of done this?

Quality is not great but you can see what i mean.

http://i794.photobucket.com/albums/y...0/untitled.jpg

dj219957

tbh mate none of that looks dodgy to me, i know on mine theres are few wires which have grey tape and have bits taped back, that how they have been on both my scoobies.
Some of my wires have thick metal outers which are taped back. so long as non have been cut i would assume they are ok.