2.5 legacy twin turbo engine in wrx
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2010
Location: staffordshire
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
2.5 legacy twin turbo engine in wrx
hi ive been offered a 2.5 legacy twin turbo engine for my wrx wagon my mate has had the box foe his wrx an it fits perect so im thinking eng must too ????
#2
Former Sponsor
iTrader: (30)
Join Date: Jan 2005
Location: FB Tuning Workshop - HP27
Posts: 4,219
Likes: 0
Received 0 Likes
on
0 Posts
If it's a early Legacy turbo (upto 1998) then the engine will physically fit any impreza up to 1998, and can be installed with all of your existing anciliary parts.
You'll need to block off the passenger side turbo oil feed and drain, and coolant feed.
Be aware that the Legacy TT engine has a higher CR than an Impreza Turbo motor
You'll need to block off the passenger side turbo oil feed and drain, and coolant feed.
Be aware that the Legacy TT engine has a higher CR than an Impreza Turbo motor
#4
Scooby Newbie
Thread Starter
Join Date: Jan 2010
Location: staffordshire
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
If it's a early Legacy turbo (upto 1998) then the engine will physically fit any impreza up to 1998, and can be installed with all of your existing anciliary parts.
You'll need to block off the passenger side turbo oil feed and drain, and coolant feed.
Be aware that the Legacy TT engine has a higher CR than an Impreza Turbo motor
You'll need to block off the passenger side turbo oil feed and drain, and coolant feed.
Be aware that the Legacy TT engine has a higher CR than an Impreza Turbo motor
#5
Scooby Regular
iTrader: (2)
Join Date: Aug 2007
Location: Northern Ireland. Part of the UK
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
Basically what Fiestaboy is saying is , its not a dropin fit as it is. Your ECU wont be set up to run the twinturbo lump,
however the block and heads would work with all your ancills, ie inlet manifold,turbo headers etc etc with the oil pipe mod as said.
The other option is just to use the 2.5 shortblock if it is a 2.5 again it will need set up correctly into your car.
Not worth the hassle imo
however the block and heads would work with all your ancills, ie inlet manifold,turbo headers etc etc with the oil pipe mod as said.
The other option is just to use the 2.5 shortblock if it is a 2.5 again it will need set up correctly into your car.
Not worth the hassle imo
Last edited by 71/200; 12 February 2010 at 12:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM