Seat Runners/Side Mounts
#1
Seat Runners/Side Mounts
Last edited by Saalro; 29 September 2017 at 10:04 PM.
#3
You will either need to buy a subaru specific subframe or make something. I butchered the subframes from an old set of subaru seats and used some flat bar and then my side mounts are bolted to the flat bar.
You will see subframes in the link you posted.
You will see subframes in the link you posted.
#4
So the side mounts attach to either side of the seat and then you attach the side mounts to the sub frame?
Thanks
Thanks
Last edited by Saalro; 29 September 2017 at 10:04 PM.
#6
I've just done this little project.
Firtsly you dont need to buy a special subframe
I have a Cobra Sebring pro seat (GT size for the larger driver). I guess the std size seat will require a little more reworking as it will be narrower.
I have fitted the correct cobra side mounts to the seat sides and then fitted the sidemounts to a set of OEM sliding rails from an early Impreza (not the later tilt adjust type)
I used some 6mm plate as a spacer in order to clear the slider mechanism of the rails. I used grade 12.8 socket head bolts & nylok nuts to mount it all together.
Works a treat
Firtsly you dont need to buy a special subframe
I have a Cobra Sebring pro seat (GT size for the larger driver). I guess the std size seat will require a little more reworking as it will be narrower.
I have fitted the correct cobra side mounts to the seat sides and then fitted the sidemounts to a set of OEM sliding rails from an early Impreza (not the later tilt adjust type)
I used some 6mm plate as a spacer in order to clear the slider mechanism of the rails. I used grade 12.8 socket head bolts & nylok nuts to mount it all together.
Works a treat
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM