Quick Check Engine Light Question (1997 P Classic)
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Aug 2008
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Quick Check Engine Light Question (1997 P Classic)
So today, whilst i sat waiting for my gf to finish work (with car running),
i noticed my check engine light was on.... i dont know how long it had been on for, but i switched off engine, waited 30 seconds, and started again.
The light came back on, anyway, the gf gets in, and i start moving, the light went off. stayed off till on a slight down hill slant and me braking it came on again. i turned the corner up a hill slant, light went off again. then appears to be staying off! Could it be a fluid (eg power steering perhaps??)
Ive read this:
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Reading ECU Fault Codes
But before i get my head under there i thought id ask if this will work on mine (1997 Classic) as its got the Apexi FC ecu + hand controller.
Many thanks in advance, beit a simple yes or no, or you thoughts on it.!
Cheers
James
i noticed my check engine light was on.... i dont know how long it had been on for, but i switched off engine, waited 30 seconds, and started again.
The light came back on, anyway, the gf gets in, and i start moving, the light went off. stayed off till on a slight down hill slant and me braking it came on again. i turned the corner up a hill slant, light went off again. then appears to be staying off! Could it be a fluid (eg power steering perhaps??)
Ive read this:
Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Reading ECU Fault Codes
But before i get my head under there i thought id ask if this will work on mine (1997 Classic) as its got the Apexi FC ecu + hand controller.
Many thanks in advance, beit a simple yes or no, or you thoughts on it.!
Cheers
James
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM