td04-ihi-vf28
#2
depends what year? if your car is a facelift classic onwards then yes it will fit as long as you get the correct water pipe and and oil feed banjo bolt, it will need mapping though, if you car is a early pre-facelift impreza it will still fit but in addition you will need a 90degree silicone pipe to come off the turbo.
#6
yes if that's the case and as you say it has all the fittings it will bolt straight on , i would use at least a new up-pipe to turbo gasket, as they are such a pain to re do if it blows, has your car not already got 440`s fitted??
#7
Scooby Regular
Thread Starter
iTrader: (11)
Join Date: Jul 2009
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
Pass I'm pretty new to the whole Subaru scene thought only sti's had them ??? My cars got a genuine ppp sti ecu in it so been told it can be remaped??
Last edited by band_wagon; 12 December 2009 at 08:36 PM.
Trending Topics
#8
Also, if you have the PPP ECU, while it can be remapped you'd be better off buying a standard one cheap and using that for the remap, and then selling the PPP unit on. You're likely to make a good couple of hundred quid better off that way and the end result will be exactly the same.
Last edited by Splitpin; 12 December 2009 at 08:38 PM.
#9
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
as has been said 440cc injectors already and stsandard ecu is mappable but sell the ppp on.. no need to pay lots for a secondhand ecu as EcuTek sell ones with new processors for £146 including delivery, talk to your mapper
Simon
Simon
#10
I sold mu ppp ecu for £350 on ebay and got a standard one for £50, i bought a quality hybrid fmic from Harvey on here with the money i made
#11