mje_wrx

iTrader: (6)

what the best oil to run engine in. i hear people using 10w 40 from halfords and tehn going to good oil when run in.

whats best. what grades and mineral, synthetic etc

thanks

TonyBurns

iTrader: (3)

10w40 semi synthetic, dont use a pure mineral oil as they just break down in these engines and provide naff all protection
Run it in for about 5k miles before considering even going fully synthetic.

Tony

oilman

iTrader: (9)

You can use a mineral oil, just change it a little more often during the running in period. You don't want to use a good oil as they lubrictae too well and it doesn't run in properly

Steve Whitehorn

iTrader: (13)

10-40 mineral for the first 1000 miles
Putting the engine under load up and down hills
Max boost 0.9bar max RPM 4,000
Drop it out

Then some seem to go semi synth for a thousand and then go fully synth.
And some just go straight to fully synth.

Eventually - Silkone Pro S 10w50 Fully synth Esther is the one that keeps getting recomended to me.

oilman

iTrader: (9)

The Pro S is ideal for when it's been run in. Don't use it until it's properly run in though