hi all as title really ive got an avcr boost controller fitted to my classic and has worked fine boosting at 1.4 bar but now its only boosting at .5 .. mrs was last to drive but im sure no settings have altered ...
ok so i can hear the solenoid click when the ignition is turned on but cant hear it workin on the road has anyone every had any problems with the avcr or the solenoid as at the minuite im gutted its crud to drive and im running out of ideas
Thanks all of ideas or info welcome

 

Pipe work to and from the solonoid ok ? is the right boost setting selected ie of position on the avcr is actuator pressure wich can be around 5 psi depending on turbo.

 

yeh checked the pipe work and its all good ..dont understand that last bit youve lost me

 

oh it has 3 settings and its like its constantly on the off setting

 

on the boost settings on the avcr where you can switch between high and low boost (A and B) is it on one of them or does it have OFF displayed?

 

i had the pressure sensor on my avcr fok up before and when it was broken it would not boost. replaced it with a new one and it worked fine.

if you know someone with a avcr as well, try his, its only got 1 plug and 1 vac hose to it, so a 30 sec to swap over to try

 

ok its set to A all the time but is only boosting at .5 bar...Its less than when it was standard lol like its not working at all... is the pressure switch the other one that sit under the bonnet with a vac pipe attatched to it ?? and where did you get one from as nobody I know has got one i can borrow

 

if you around cambridge way, i can try mine,

it looks like this

http://www.frsport.com/images/detail...499-X002_1.jpg


this is where i brought mine from
Indigo-GT: Online

 

haha thats the one and it does make sense really as i know the solenoid works as i can hear it clickin when i power it up top bloke will try one .. unfortunatly im in the midlands near leics but its very decent of you to offer top man thanks for your help problem solved ??? maybe

 

**** me how much ???