jeffwrx

iTrader: (50)

I bought these injector form eBay USA , they were said to be removed from a USDM 2.5 sti 06 or 07 i think. i wanted to fit them to my 95wrx , but the plug didn't fit so i decided not to fit them as i have got some 440's as well ,
so now trying to sell them , but i still can not find out what cc or make the are , i was told by the seller they were JECS and 565cc.
but i have searched and nothing matches up , the closest i have found what look similar are these Nismo/Tomei 740cc's , they even have the same logo/mark onb the side of the injector , and "made in japan" wrote on the black part, but my part no doesn't match up any help much appreciated , cheers

part no.(numbers written on top of injector -0126922 ,/ A46-Z00 ,/
my injectors -


Google Image Result for http://thumbnail.image.rakuten.co.jp/@0_mall/flatwell/cabinet/item/740cc.jpg

jeffwrx

iTrader: (50)

have found this link now (below) and the numbers match up to mine , so it seems like they are infact nismo 740cc injectors , now would these work alright in my 95wrx if i got the adaptors , aiming for around 320 -340 bhp its either that or i have some yellow 440's , cheers
NISMO 740cc INJECTORS SR20 SET OF 4 WITH FREE SHIPPING! on eBay (end time 13-Dec-09 11:02:50 GMT)

scoobiewrx555

Your 95WRX with these fitted will be overfuelling like crazy. Once you get them on you're going to need a remap. They are a bit overkill though, even the 550's will be a bit ott without a decent turbo to make best use of them. There's a bit more to do to make it all sing but i'm sure you get the gist.

Stick to the 440's and just get a decent remap. ESL is the way to go there.

jeffwrx

iTrader: (50)

yeah i'm getting a remap ,and know these 740's are overkill lol. but the seller sold them to me as 550's , i would rather use them than the 440's i have as they look new /better condition and then i know for sure it will have enough fuel , cheers

Lateral Performance

iTrader: (20)

what's the sheet of paper they're on. Is it from flow testing ?

jeffwrx

iTrader: (50)

its from when i had them ultrasonic cleaned/tested , but says nothing about flow testing , also i can get the plug to fit now but only upside down , does it matter which way the wires go on subaru injectors , cheers

Lateral Performance

iTrader: (20)

If they have been tested, there must be something on the sheet relating to flow.

If they are 740's, I have the proper connector kits in stock.


Mark.