Jubile clip came off !!!
30 November 2009, 09:25 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Reigate Surrey
Posts: 2,656
Likes: 0
Received 0 Likes
on
0 Posts
Jubile clip came off !!!
The jubilee clip that goes on the pipe from the turbo to the I/C (bend Under neath) the I/C came off today and made a right funny noise 
anyway put it back on and no problems. Is there any reason why this would come off ?? the cars is a 2006 sti mapped to 1.4 bar .I know this was tight a few months ago so why now ? Also the red bend piece of pipe looks crap sort of has red tape on it as well is there a after market one you can get 
anyway put it back on and no problems. Is there any reason why this would come off ?? the cars is a 2006 sti mapped to 1.4 bar .I know this was tight a few months ago so why now ? Also the red bend piece of pipe looks crap sort of has red tape on it as well is there a after market one you can get
30 November 2009, 09:38 PM
#2
Engine breathing a bit more with higher boost and the oil is lubricating the join?
I had this problem repeatedly after swapping to a 20g. The std red hose is cut a little short and an odd shape to fit anything other than the VF43.
Solution was an SFS 90 deg hose cut to size.
Nick
I had this problem repeatedly after swapping to a 20g. The std red hose is cut a little short and an odd shape to fit anything other than the VF43.
Solution was an SFS 90 deg hose cut to size.
Nick
30 November 2009, 09:48 PM
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Reigate Surrey
Posts: 2,656
Likes: 0
Received 0 Likes
on
0 Posts
Engine breathing a bit more with higher boost and the oil is lubricating the join?
I had this problem repeatedly after swapping to a 20g. The std red hose is cut a little short and an odd shape to fit anything other than the VF43.
Solution was an SFS 90 deg hose cut to size.
Nick
I had this problem repeatedly after swapping to a 20g. The std red hose is cut a little short and an odd shape to fit anything other than the VF43.
Solution was an SFS 90 deg hose cut to size.
Nick
Is there a better hose I can get ? would a SFS 90 deg hose cut to size fit my standard turbo ?
Cheers Steve.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM