Induction pipe-fitting
#1
Scooby Regular
Thread Starter
Join Date: Oct 2008
Location: Poland-Warsaw
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Induction pipe-fitting
Hi,
i have a ver.6, turbo 2000, (GT in EU) MY 00 classik. Recently I bought Samco induction pipe like this
Today i looked inder my hood and it seems that it wont fit, due to power steering. In the angle, where power steering container is, pipe is to thick...
It seems that pipe like this should fit
And now im wondering if somebody has samco like pipe fited to ver.6 GC8 and could show me picture of it? Is it possbile to to fit samco to my engine?
Cheers
Peter
i have a ver.6, turbo 2000, (GT in EU) MY 00 classik. Recently I bought Samco induction pipe like this
Today i looked inder my hood and it seems that it wont fit, due to power steering. In the angle, where power steering container is, pipe is to thick...
It seems that pipe like this should fit
And now im wondering if somebody has samco like pipe fited to ver.6 GC8 and could show me picture of it? Is it possbile to to fit samco to my engine?
Cheers
Peter
Last edited by the.wolf; 27 October 2009 at 03:00 PM. Reason: spellcheck
#2
Your Samco one should fit - although it will be crushed slightly by the PAS tank. The optimal solution is to remote mount the fluid reservoir, which is easy to do with a few parts from a newage car and an adapter for the pump you can order via a Subaru dealer.
If anything I would say that the second pipe you have shown won't fit, as the dumpvalve recirc port and the head oil breather port look too close together. You would almost certainly find that the breather entry would foul on the fuel rail
If anything I would say that the second pipe you have shown won't fit, as the dumpvalve recirc port and the head oil breather port look too close together. You would almost certainly find that the breather entry would foul on the fuel rail
#3
Scooby Regular
Thread Starter
Join Date: Oct 2008
Location: Poland-Warsaw
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
great news about this remote cointainer. Especially that intake diameter will increase.
I will have to ask my tuner for this action
Did anybody do already remote container?
I will have to ask my tuner for this action
Did anybody do already remote container?
Last edited by the.wolf; 26 October 2009 at 11:05 PM.
#5
Scooby Regular
Thread Starter
Join Date: Oct 2008
Location: Poland-Warsaw
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
I already talked with my garage 4turbo.pl and they say its no problem to relocate PS container.
I have to gather parts.
thanks for help all.
I have to gather parts.
thanks for help all.
Last edited by the.wolf; 27 October 2009 at 02:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
BlueBlobZA
Member's Gallery
30
25 July 2016 09:14 AM
BHPvstorque
Subaru Parts
4
14 September 2015 08:25 PM