What bhp does a stadard location garret gt30 run

 

depends what other mods you've got and is it a Rotated GT30R with T3 or is is a stock position Hybrid?

A true Garrett GT3076R should flow around the 520-540 bhp mark

 

Mine is based on a GT3076 and is standard position from AET Turbos.

Last dyno run was 520bhp (at 30+degs ambient temps), but I would suspect it would run 540ish on a cool day as the ECU was running compensations. This is on VPower.

 

its a stock position hybrid on a 2.5 engine mate

 

Daz/Shaun what size exhaust housings are you both using?

 

Not sure.... IIRC it was the largest one I could use. I tried a smaller one to begin with and whilst the car made 500bhp, I had major heat problems. You would be better of discussing with AET Turbos. BTW, my current tubro made 485bhp at a paltry 1.45bar.

Daz does not use a GT30 IIRC.

 

Hmm ok thanks Shaun. I cant remember if Daz is running a 30 or 35 now.

Nevertheless thanks.