Darc174

iTrader: (13)

I have seemed to have lost the little box that sits in the bottom left corner that stores the Peak of the knock,

does anyone know where the option to turn it back on is?

cheers

darc

m@t STImulation

iTrader: (3)

on my display of 4 if you push the up or sideways button it should come back up resets the box i think so right or up m8

Ian

iTrader: (10)

the little box that you see, if the peek, as above, if you press one of the side butons, the peek will or will not show/ be saved

mike h

iTrader: (10)

Press the up arrow to turn the peak reading on. (little dark box next to live reading)
Press the down arrow to turn the peak reading off. (little dark box disappears)
Press the right button to reset the peak reading.
Press the left button to hold "live" readings.

joz8968

iTrader: (13)

mike h has it correct!

Darc174

iTrader: (13)

cheers

m@t STImulation

iTrader: (3)

i need to play with mine more to get my head round it lol i worked out thr right arrow helpful for keeping an eye on things

joz8968

iTrader: (13)

I have mine on the "4-channel" display showing the most important things that would be related to potential knock/saving the motor-based scenarios, namely:-

-Knock level
-Boost level
-Air Flow (MAF voltage reading)
-Coolant temp (or you could monitor Inj Duty in this position, for example)

And I also have the "Peak Hold" function invoked too, to check for overboost, max knock and temp readings, etc...