scooby crank and rebuild
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2009
Location: lincoln
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
scooby crank and rebuild
hi guys, i got a 2000 uk turbo on a 1999 v reg,i want to take bottom end apart and get it rebored as bores are scored and new rings, do i need new crank,seals,con rods and pistons these was replaced 4,500 miles ago?????
not sure if crank will need reground?? hopefully not, last rebuild cost me over 3600 so do want be riped off again,just planing on taking block for rebore, block doesnt need any over difficult engineering other than rebore and honing many thanks guys
not sure if crank will need reground?? hopefully not, last rebuild cost me over 3600 so do want be riped off again,just planing on taking block for rebore, block doesnt need any over difficult engineering other than rebore and honing many thanks guys
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM