sti9 tmic
20 July 2009, 05:35 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2008
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
sti9 tmic
hi all im trying to fit my sti9 tmic to my99 uk turbo.
I can get iy into postion and attached to the tb but the elbo from the turbo
wont reach up to the y pipe on the back. ived tryed to different y pipes but nothing is working.
is the sti9 y alot bigger
any advice welcome
cheers
I can get iy into postion and attached to the tb but the elbo from the turbo
wont reach up to the y pipe on the back. ived tryed to different y pipes but nothing is working.
is the sti9 y alot bigger
any advice welcome
cheers
24 July 2009, 09:19 AM
#3
Scooby Regular
Join Date: Sep 2007
Location: Stockholm, Sweden
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Is that the elbow from your MY99 or from the STi9 IC?
either way you need to lengthen the pipe. And my advice is to upgrade to a silicone hose as the OE plastic one will probably split over abt 1.3 bar.
either way you need to lengthen the pipe. And my advice is to upgrade to a silicone hose as the OE plastic one will probably split over abt 1.3 bar.
Last edited by Adam K; 24 July 2009 at 09:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
hedgecutter
General Technical
3
25 September 2015 02:35 PM