Help Please.......injector installation problems
#1
412/425 of forged love
Thread Starter
iTrader: (12)
Join Date: Jan 2008
Location: www.surreyscoobies.com
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
Help Please.......injector installation problems
Hello,
Went to put in some roger clark 750cc injectors i got from on here. The fuel rail will not clamp down onto the inlet manifold with injectors in place.
I put the 550's back in and it sat fine but it sits alot higher with the 750's in.
Am i missing parts or do i need some sort of spacers with them
Massive thanks in advance.
Went to put in some roger clark 750cc injectors i got from on here. The fuel rail will not clamp down onto the inlet manifold with injectors in place.
I put the 550's back in and it sat fine but it sits alot higher with the 750's in.
Am i missing parts or do i need some sort of spacers with them
Massive thanks in advance.
#2
Scooby Regular
iTrader: (24)
you need a spacer kit that has thick washers the correct size and longer bolts to hold the injector cap on.
roger clark sells them i think or carl davey £30
Carl Davey, specialist Subaru Impreza parts supply
hope this helps
roger clark sells them i think or carl davey £30
Carl Davey, specialist Subaru Impreza parts supply
hope this helps
#4
412/425 of forged love
Thread Starter
iTrader: (12)
Join Date: Jan 2008
Location: www.surreyscoobies.com
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
no def have top feed injectors
same look as these
Roger Clark Motorsport - RCM Product Detail
it says direct fitment, didnt know id need extra bits
same look as these
Roger Clark Motorsport - RCM Product Detail
it says direct fitment, didnt know id need extra bits
#5
412/425 of forged love
Thread Starter
iTrader: (12)
Join Date: Jan 2008
Location: www.surreyscoobies.com
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
sorry i have a bugeye wrx. just removed sit 550 pinks and wanted to upgrade to 750's
cant do a pic of injecors at moment but they look same as ones in link above
cant do a pic of injecors at moment but they look same as ones in link above
#6
Did you take the 4-5mm thick O ring seal off the bottom of the STI pinks and fit that onto your new injectors? If you did, that could be your problem. I think your new injectors have their own O ring seal slightly further up the body so you don't need the thick one as well.
Steve
Steve
Thread
Thread Starter
Forum
Replies
Last Post