NO EGT CEL AFTER FITTING DECAT?
#1
NO EGT CEL AFTER FITTING DECAT?
as above i just fitted harveys ported headers and matched up pipe and he also gave me the cel fix for the egt sensor that was in the up pipe 2003 wrx engine so fitted took out for a small drive and very impressed with the diffrence infact was giving it the beans and blew an intercooler pipe off
so inever fitted the cel fix was waiting for the engine management to come on or worse and nothing!!?? is this normal car seemed to be running ok i will run 2 or 3 days and see if theres any change but i was expecting it to be on straight away is this normal or am i lucky!
so inever fitted the cel fix was waiting for the engine management to come on or worse and nothing!!?? is this normal car seemed to be running ok i will run 2 or 3 days and see if theres any change but i was expecting it to be on straight away is this normal or am i lucky!
#2
The WRX ECU will throw an EGT missing CEL when it decides something is wrong LOL
The ECU is pretty clever and waits a while, usually about 5 engine starts and then on a long run it will light up
I guess the CEL fix is a resistor that you put into the loom near the drivers side suspension turret
Shaun
The ECU is pretty clever and waits a while, usually about 5 engine starts and then on a long run it will light up
I guess the CEL fix is a resistor that you put into the loom near the drivers side suspension turret
Shaun
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM