What exhaust with a MD321t
#1
Scooby Regular
Thread Starter
Join Date: Oct 2004
Location: Liverpool
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
What exhaust with a MD321t
Was looking to swap my 3.5" APS exhaust system due to it being a bit loud since fitting some RCM headers, but have now found that due to the twin dump style downpipe I am suffering boost creep which meant my car was recently unmappable.
So will any open neck 3" system be OK?
What works for you?
Views and opinions please.
CHEERS,
Dave.
So will any open neck 3" system be OK?
What works for you?
Views and opinions please.
CHEERS,
Dave.
#2
Scooby Regular
Thread Starter
Join Date: Oct 2004
Location: Liverpool
Posts: 485
Likes: 0
Received 0 Likes
on
0 Posts
Forgot to add some figures regarding my perceived problem.
Upon completely releasing the actuator arm and thus allowing the wastegate to freely blow open, I am still making about 1.35 bar of boost at around 6k revs.
Am I correct in thinking that I should only be making around 0.9-1.0 bar, and that my twin dump downpipe is causing the restriction?
Upon completely releasing the actuator arm and thus allowing the wastegate to freely blow open, I am still making about 1.35 bar of boost at around 6k revs.
Am I correct in thinking that I should only be making around 0.9-1.0 bar, and that my twin dump downpipe is causing the restriction?
Last edited by Mackers; 26 May 2009 at 09:52 PM. Reason: typo
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM