Subaru 1999 heater blower problems
21 May 2009, 12:36 PM
#1
Scooby Newbie
Thread Starter
Join Date: May 2009
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Subaru 1999 heater blower problems
I have a 1999 UK2000 Turbo, The heater / Blower has just stopped working, I have checked all the fuses and they are ok, what can be the problem?
I will take the blower out over the weekend and run a direct feed and see the electric motor is still working can it be anything else? instrument connectors etc.
Ideas anyone?
ta
I will take the blower out over the weekend and run a direct feed and see the electric motor is still working can it be anything else? instrument connectors etc.
Ideas anyone?
ta
21 May 2009, 01:13 PM
#2
Scooby Regular
iTrader: (4)
Join Date: Aug 2002
Location: Neath, Wales
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Remove the glovebox and you should be able to see the multiplug connectors. Check to see if these are seated properly or that there is a +ve feed into the blower from the loom.
HTH
HTH
Last edited by notfub; 21 May 2009 at 01:14 PM. Reason: spelling
25 May 2009, 06:30 PM
#4
Scooby Regular
iTrader: (4)
Join Date: Aug 2002
Location: Neath, Wales
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Not sure how you got on but I'm assuming that you don't hear the blower when you switch up the fan speed? Could be the cable connection has become disconnected fron centre console to blower? Could be that the motor has expired in the blower itself? Just guessing really mate. How far have you got?
Thread
Thread Starter
Forum
Replies
Last Post