93 WRX boost cut point?
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: holywell
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
93 WRX boost cut point?
I've got a 93 wrx, it cuts out when it's boosting, not sure when the overboost cuts in. It cuts out at about 1.1/1.2 bar, it's std with just a decat downpipe.
#2
Scooby Regular
iTrader: (2)
Join Date: Apr 2009
Location: Cambridge
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
this sounds perfectly normal to me, your decat is making it overboost. a cut around 1.1 bar is correct for safety, normal max boost is about 0.9 I think. I believe the basic quick fix options are fit a manual (or any kind of!) boost controller to limit boost, or perhaps adjust the turbo actuator arm
#3
Scooby Regular
iTrader: (13)
Max boost on a std 1993 WRX saloon (with the TD05 16g turbo) is 11.47psi (0.79bar).
Subaru most likely set the boost-cut at c.0.2bar more i.e. 1bar (14.5psi)... Or it could be at the MAP sensor's actual limit of 1.2bar(?).
Subaru most likely set the boost-cut at c.0.2bar more i.e. 1bar (14.5psi)... Or it could be at the MAP sensor's actual limit of 1.2bar(?).
Last edited by joz8968; 18 May 2009 at 04:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM