Which scoop/undertray splitter is to be used on the PRE-Facelift bonnets ?

so im fitting a blobeye intercooler,is there an undertray splitter from any classics etc that fit the pre facelift bonnet that will marry upto this cooler ?

 

I fitted a undertray from a blobeye wrx to my 1995 wrx when i fitted a sti v6 intercooler , it works well , but was not a direct fit , had to cut it down a bit and drill new bolt holes .

 

ah,o.k,thats no problem,drilling new holes isnt an issue, when you say cut it down, using tin snips/a drill etc,will that do the job ?
If its just a case of that then thats fine


cheers

 

did it look something like this ?

Bugeye



Or will this one fit better

Hawkeye




cant seem to find a Blobeye one, Grrr !!!!

 

yeah tin snips and a drill should be fine , this is the undertray i used subaru impreza scoop/ intercooler undertray on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 05-Apr-09 17:22:11 BST) , i will take a pic of the undertray fitted tomorow and post it on here if it helps

 

cheers bud,appreicate the pic if you can get one.

the one you bought is the same i think as the 1st one i posted up

One other thing,both the undertrays,the 1 you bought and the one in the 1st pic i posted up are from Bugeye`s, 2001 models,blobeyes were 2003- 2005 i thought ?

but if they fit/work yey !

 

think its my mistake mate , it must be a bug eye undertray i have then , so that 1st pic you posted up is the one , i will get a pic tomorow

 

No worries Bud,im only just gettin the models right cause of this TMIC issue,bug eye,blob eye hawk eye,Round eye, peanut eye for gods sake too many references !!!

cheers

 

here's a couple of pics ,

 

Sound,cheers !

Looking good !

i managed to buy one so it should be here soon,im just hoping the Bugeye undertray fots the Blobeye intercooler ?

would of thought so,i cant see the blobeye wrx intercooler being any bigger than that STI one you have fitted

cheers again bud

 

Made my own from flat sheet steel,