fitting vf35 to Wrx 03?
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Feb 2008
Location: West Sussex
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
fitting vf35 to Wrx 03?
Managed to source a vf35 and sti pink injectors etc for my Wrx 2003. And now just trying to sort out everything I need for my mechanic to fit this to my car ready for the re-map. So far on my list I have down pipe gasket and up pipe gasket plus 6 new studs, Will all the other pipes fit straight on or do I need a different size oil feed pipe etc? and is there anything else I should get to be on the safe side for fitting the turbo/injectors???
#2
Former Sponsor
iTrader: (3)
It would be worth getting a walbro 255 fuel pump too:
Lateral Performance Ltd| Home | Fuel System | Fuel Pumps | Walbro 255lt fuel pump kit for '01 > New Age
Everything else should fit straight on.
Makes for a very nice car when mapped
Lateral Performance Ltd| Home | Fuel System | Fuel Pumps | Walbro 255lt fuel pump kit for '01 > New Age
Everything else should fit straight on.
Makes for a very nice car when mapped
#3
Scooby Regular
iTrader: (2)
I found a braided oil feed pipe made reassembly a lot easier.
I'd check the size of oil feed banjo hole on top of the turbo, I found my 03 WRX already had a small diameter hole that was fine for the VF35.
A pump like Duncan says.
Presuming you'll also have a sports cat or decat, the std turbo heat shield won't fit and will need triming.
Nick
I'd check the size of oil feed banjo hole on top of the turbo, I found my 03 WRX already had a small diameter hole that was fine for the VF35.
A pump like Duncan says.
Presuming you'll also have a sports cat or decat, the std turbo heat shield won't fit and will need triming.
Nick
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM