new exhaust questions
#1
new exhaust questions
hi all, i want to get an exhaust for MY05 wrx.
seen this decat... is that hole for the lamba sensor? will i have any problems with engine management buy bolting it on?
SUBARU IMPREZA NEWAGE WRX STi DE CAT EXHAUST DECAT PIPE on eBay, also Exhaust Components, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 04-May-09 17:29:23 BST)
Also looking at this pipe. now i no its not going to be the top of the range exhaust but i honestly cant afford it. i know the claims are ridculous with 20bhp but surly some gain must be made?
01-06 SUBARU IMPREZA WRX/STi CATBACK EXHAUST SYSTEM on eBay, also, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 10-May-09 22:35:40 BST)
will them 2 bits just all bolt together and fit.. or do i need another piece?
thanks
seen this decat... is that hole for the lamba sensor? will i have any problems with engine management buy bolting it on?
SUBARU IMPREZA NEWAGE WRX STi DE CAT EXHAUST DECAT PIPE on eBay, also Exhaust Components, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 04-May-09 17:29:23 BST)
Also looking at this pipe. now i no its not going to be the top of the range exhaust but i honestly cant afford it. i know the claims are ridculous with 20bhp but surly some gain must be made?
01-06 SUBARU IMPREZA WRX/STi CATBACK EXHAUST SYSTEM on eBay, also, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 10-May-09 22:35:40 BST)
will them 2 bits just all bolt together and fit.. or do i need another piece?
thanks
#3
Scooby Regular
Join Date: Mar 2009
Location: Northampton
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Hi Ash.
The decat section is 2.5 inch and the centre and rear section are 3 inch so they will not fit together.
looks like the decat pipe has a hole for the sensor. Im fitting a similar decat pipe to my 2004 wrx tomorrow so ill let you know if I get a CEL on.
The decat section is 2.5 inch and the centre and rear section are 3 inch so they will not fit together.
looks like the decat pipe has a hole for the sensor. Im fitting a similar decat pipe to my 2004 wrx tomorrow so ill let you know if I get a CEL on.
#5
Scooby Regular
Join Date: Mar 2009
Location: Northampton
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
hi Ash,
Fitted it this morning. a bitch of a job as all the nut and bolt heads had rotted away had to cut some of with a hack saw. but worth it in the end. I fitted it with a prodrive back box at the same time and it makes a noticable difference in power an also a nice scoby burble. make sure you have all the gaskets as the only one that was ok to reuse was the one between the downpipe and decat section. it hasnt put any warning lights on but I am using a second hand prodrive ecu so I dont know if they change the software to compensate or not.
Danog.
Fitted it this morning. a bitch of a job as all the nut and bolt heads had rotted away had to cut some of with a hack saw. but worth it in the end. I fitted it with a prodrive back box at the same time and it makes a noticable difference in power an also a nice scoby burble. make sure you have all the gaskets as the only one that was ok to reuse was the one between the downpipe and decat section. it hasnt put any warning lights on but I am using a second hand prodrive ecu so I dont know if they change the software to compensate or not.
Danog.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM