ticking speedo
#3
Scooby Regular
I had that a year or so back
Due to the reduction gearbox in the cable (which on mine was postioned close to the clutch master clylinder and turbo area)
Repositioning it slightly reduced the click
BUT
A few months later the reduction gearbox siezed occasionally , and snapped the speedo cable (and/or the repair I had done to it)...
Eventually stripped and cleaned the reduction gearbox to stop it happening again
Due to the reduction gearbox in the cable (which on mine was postioned close to the clutch master clylinder and turbo area)
Repositioning it slightly reduced the click
BUT
A few months later the reduction gearbox siezed occasionally , and snapped the speedo cable (and/or the repair I had done to it)...
Eventually stripped and cleaned the reduction gearbox to stop it happening again
#5
Former Sponsor
iTrader: (48)
Mark: The cable from speedo passes through the bulk head & sits into a circular tube where drive is transferred. Only held in by by a free weight. Working on speedo head or in cable run area can dislodge or miss align as can enthusiastic take off over hump back bridge.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM