Speed sensor 2/Error code 33
#1
Speed sensor 2/Error code 33
Hi guys.
Having a headache with my Jdm95 Sti!!! Had my car ecl come on and after a ecu reset i get error code 33 which is the speed sensor 2 curcuit. As i know this is part of the speedo head i've fitted a new set of clocks but still having the same problem and as i know little bout electrics i'm abit stumped now. Been told it could be a wiring problem between the clocks and ecu! Anyone had this problem or similar a problem and offer some much needed help!?!
Cheers Jay.
Having a headache with my Jdm95 Sti!!! Had my car ecl come on and after a ecu reset i get error code 33 which is the speed sensor 2 curcuit. As i know this is part of the speedo head i've fitted a new set of clocks but still having the same problem and as i know little bout electrics i'm abit stumped now. Been told it could be a wiring problem between the clocks and ecu! Anyone had this problem or similar a problem and offer some much needed help!?!
Cheers Jay.
#2
Scooby Regular
iTrader: (1)
Join Date: Apr 2008
Location: derbyshire
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
has it had the converter fitted to change it from kph to mph as mine was doing the same but when i removed the converter and run it for a month no cel light put the converter back on cel light keep coming back so i just put up with it until i get the apexi fitted hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM