blobeye decat query
#1
Scooby Regular
Thread Starter
Join Date: Jan 2009
Location: sevenoaks
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
blobeye decat query
ok, im having a decat done on saturday but was just wondering what i need to do with the sensors and will i need a remap. its a my03 ppp wagon.
#4
Scooby Regular
iTrader: (1)
Join Date: Dec 2001
Location: You only live ONCE But if you do it right >>>>> ONCE is enough
Posts: 7,327
Likes: 0
Received 0 Likes
on
0 Posts
I did this with my MY03 PPP Stealth Wagon which will give you an idea of what results you may get.
Hayward & Scott 100 cell high flow down pipe (only 2 BHP loss over decat pipe & MOT friendly)
H&S Up pipe
H&S Centre pipe straight through
I already had the short centre section from the PPP & changed the PPP Backbox to a Blitz NUR Spec S
Followed by a Tek3 re-map with Pat Herborn to get everything flowing nicely.
290bhp up from 252bhp
275lbft up from 263lbft
Boost 1.3bar up from 1.2bar.
I am a happy bunny
My missing sensor CEL light was sorted out by the map.
I am in Essex & booked my map through Xtreme @ Boreham.
There is a guy in Kent, Simon, that has very good feed back on his mapping & several of the ESC have used his services :-
https://www.scoobynet.com/traders-co...r-limited.html
Hayward & Scott 100 cell high flow down pipe (only 2 BHP loss over decat pipe & MOT friendly)
H&S Up pipe
H&S Centre pipe straight through
I already had the short centre section from the PPP & changed the PPP Backbox to a Blitz NUR Spec S
Followed by a Tek3 re-map with Pat Herborn to get everything flowing nicely.
290bhp up from 252bhp
275lbft up from 263lbft
Boost 1.3bar up from 1.2bar.
I am a happy bunny
My missing sensor CEL light was sorted out by the map.
I am in Essex & booked my map through Xtreme @ Boreham.
There is a guy in Kent, Simon, that has very good feed back on his mapping & several of the ESC have used his services :-
https://www.scoobynet.com/traders-co...r-limited.html
Last edited by FLAT ERIC; 26 March 2009 at 01:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM