Exhaust/Turbo Gaskets
#1
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: May 2005
Location: Portsmouth
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust/Turbo Gaskets
I'm swapping out my headers and turbo this weekend on my '97 WRX, and I was wondering if its advised to replace all the gaskets or if the original items will still be OK to use??
If I need new ones, where's the best place to get them from, as I cant seem to find any
Cheers in advance
Mark
If I need new ones, where's the best place to get them from, as I cant seem to find any
Cheers in advance
Mark
#2
Scooby Regular
iTrader: (13)
Whilst it's a fair job, and that gaskets are important parts on the system, I would defo get new items - you'd be well annoyed if at least one of them started blowing, after refitting everything, etc... Do it right; do it once!
These are the cheapest ALL-METAL items I've seen on eBay...
Block to headers...
http://cgi.ebay.co.uk/SUBARU-IMPREZA-EJ20-EJ25-Exhaust-Manifold-Gasket_W0QQitemZ120287961010QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item1202879610 10&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|3 9%3A1|240%3A1318
Headers cross pipe...
http://cgi.ebay.co.uk/Genuine-Subaru-exhaust-manifold-gasket-Impreza-WRX_W0QQitemZ120374518575QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item120374518575& _trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3 A1|240%3A1318
Headers to up-pipe...
http://cgi.ebay.co.uk/Genuine-Subaru-exhaust-manifold-up-pipe-gasket-Impreza_W0QQitemZ120384660131QQcmdZViewItemQQptZUK _CarsParts_Vehicles_CarParts_SM?hash=item120384660 131&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15| 39%3A1|240%3A1318
Up-pipe to turbo...
http://cgi.ebay.co.uk/Subaru-Impreza...3A1|240%3A1318
These are the cheapest ALL-METAL items I've seen on eBay...
Block to headers...
http://cgi.ebay.co.uk/SUBARU-IMPREZA-EJ20-EJ25-Exhaust-Manifold-Gasket_W0QQitemZ120287961010QQcmdZViewItemQQptZUK_ CarsParts_Vehicles_CarParts_SM?hash=item1202879610 10&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|3 9%3A1|240%3A1318
Headers cross pipe...
http://cgi.ebay.co.uk/Genuine-Subaru-exhaust-manifold-gasket-Impreza-WRX_W0QQitemZ120374518575QQcmdZViewItemQQptZUK_Car sParts_Vehicles_CarParts_SM?hash=item120374518575& _trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3 A1|240%3A1318
Headers to up-pipe...
http://cgi.ebay.co.uk/Genuine-Subaru-exhaust-manifold-up-pipe-gasket-Impreza_W0QQitemZ120384660131QQcmdZViewItemQQptZUK _CarsParts_Vehicles_CarParts_SM?hash=item120384660 131&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15| 39%3A1|240%3A1318
Up-pipe to turbo...
http://cgi.ebay.co.uk/Subaru-Impreza...3A1|240%3A1318
Last edited by joz8968; 23 March 2009 at 03:45 PM.
#3
Scooby Regular
iTrader: (25)
Join Date: Feb 2008
Location: MSOC
Posts: 3,135
Likes: 0
Received 0 Likes
on
0 Posts
Stick to genuine subaru gaskets m8 ... i think all of them are ok except the 1st ones for the headers.... i don' think they are genuine....but i've bought mine on flebay as well so u should find those ....
#4
Scooby Regular
iTrader: (2)
Join Date: Aug 2008
Location: In the middle somewhere..
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
im doing mine atm and its a biatchh.. headers wherent too difficult but geting up up-pipe out is a pissing pain in the ***!! still working to get it out atm. I got my gaskets of fleabay.. the manifold to header need to be like these Genuine Subaru exhaust manifold gasket Impreza WRX on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 07-Apr-09 13:39:49 BST) these where similar to the ones which came off! their might be a how to guide on here some where so maybe some one will post it for you.. good luck
Thread
Thread Starter
Forum
Replies
Last Post