adehook

i just aquired a turbosmart supersonic valve and just tried to fit it and the pipes that bolt on the intercooler which i think are some sort of vacum hoses. theres two of them. are in the way of the valve if i undo them and just fit the valve i can not get the pipes back in place to rebolt them in as its on the valve. any ideas on how to work around this. or anyone got pictures of one of these fitted.

adehook

Bump

adehook

Has no one got a picture of one fitted to a newage?

mathsteacher

problem solved mate. they should come with a breather pipe and a t piece and hose connector. you remove the hard pipes that run across the intercooler and use the t piece on the left hand side then join the new hose to the hose at the right with the connector see TURBOSMART: INSTRUCTIONS & DOWNLOADS

adehook

Thanks mate. Where's best to hide the new pipe. Round the back of the cooler or under the throttle body?

Also will a jubalee clip be ok to hold the big pipe on the valve as opposed to the stock spring clamp

adehook

Bump