Another which oil question.
04 March 2009, 08:12 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2000
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Another "which oil?" question.
Hi,
I've got an '03 STI which is going to see some mods shortly, mainly a MD321T, 3" exhaust and 650CC injectors, hoping for around the 400bhp mark but which oil would be best for a: normal road use and b: a trackday. Preferably which Millers spec?
P.s. Running standard STI internals by the way.
Thanks
Steve
I've got an '03 STI which is going to see some mods shortly, mainly a MD321T, 3" exhaust and 650CC injectors, hoping for around the 400bhp mark but which oil would be best for a: normal road use and b: a trackday. Preferably which Millers spec?
P.s. Running standard STI internals by the way.
Thanks
Steve
Last edited by Steve Gibbins; 04 March 2009 at 08:40 PM.
04 March 2009, 08:41 PM
#2
The 'correct' Milllers oil is their 'CFS' range, available in 10W-40 and 10W-60 flavours.
Oilman (Opie Oils) reckons that a hot '60' weight is far too viscous in today's engines, and wouldn't recommend over a '50' in the Subaru flat-4. So that leaves you with the 10W-40, which is fine.
Incidenatlly, ZEN supply and use these Millers oils.
Oilman (Opie Oils) reckons that a hot '60' weight is far too viscous in today's engines, and wouldn't recommend over a '50' in the Subaru flat-4. So that leaves you with the 10W-40, which is fine.
Incidenatlly, ZEN supply and use these Millers oils.
Last edited by joz8968; 04 March 2009 at 08:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post