BAD_MAN_121

hi , i have a hks turbo timer with all the harness, how do i fit in the timer, do anybody have instructions they can send or help me please, i have a v3 wrx on a p reg.

Cheers

jasongtr

iTrader: (19)

firstly they are a waste of time

secondly if you have the harness you simply spilt the scooby harness (2 plugs) and plug the 'y' harness that should of come with your timer into the two unplugged bits - the other end obviously goes to the timer, there was a seperate (black i think) wire that goes to the handbrake.

BAD_MAN_121

where do i connect them, theres no wire to connect near the handbrake, its basicly a timer that has a long wire that has 2 plugs at the end of it that should connect into sumat, but i dont no what into and where i can locate it.

jasongtr

iTrader: (19)

on the car i broke the plugs that need seperating and connecting (so you effectively add the turbo timer into the loom via these plugs) was under the dash on the left had side of the steering column so in between the centre console and the steering column, i assume your timer has a 'Y' shaped mini loom so it has 1 plug that goes into the timer and 2 plugs that connect it to the car

BAD_MAN_121

hi mate, yh iv opened it up and had a look, theres these green conectors and lil single black connectors, are they the 1, and yeh i think its a y shape mini loom, 1 gets connected into aqnd 1 get conncted 2