hot idle issue with simtek?
Thread Starter
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Just really wondered if anyone had experienced a similar issue.
Had my car in for an mot on sat. passed as expected. The car was idleing for quite some time. i would have thought at least and hour. Intake temps were very hot high 60's measured at intercooler. The idle speed increased to around 1500rpm and remained there until i had driven the car and got the temps back down. I also switched the anti lag on while it was hot and this gave me an idle of 4000rpm where id normally expect 1500ish.
All is ok now and has been since the temps got down to about below 25.
Had my car in for an mot on sat. passed as expected. The car was idleing for quite some time. i would have thought at least and hour. Intake temps were very hot high 60's measured at intercooler. The idle speed increased to around 1500rpm and remained there until i had driven the car and got the temps back down. I also switched the anti lag on while it was hot and this gave me an idle of 4000rpm where id normally expect 1500ish.
All is ok now and has been since the temps got down to about below 25.
Thread Starter
Joined: Jan 2004
Posts: 4,312
Likes: 0
From: Hertfordshire
Why should a top mount make a difference to the idle speed? Its been that hot before on the o/e ecu and it didnt all of a sudden alter the idle speed.
I would prefer a front mount to be honest but i havent been able to get a difinative answer on how much of my prodrive bumper i loose.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
supshon
General Technical
2
Oct 3, 2015 08:06 PM
Phil3822
General Technical
0
Sep 30, 2015 06:29 PM





