hey guys as other thread i failed my mot on the lamba being too high but it has a new lamba on it but i dont know if the guy who fitted it has connected it up right can any one tell me what wire on the lamba goes to what wire to the plug as the guy has cut and joint the wires cheers oh itsx a 95 wrx

 

If its a 3 wire lambda then its 2xwhite wires and 1xblack wire, the 2 whites goto the 2 whites (dont matter which way round it just for the heater) and the black to the black, this is the signal feed. Hth

 

Thanks.......i just went and bought a new one from dingbro.. its for a uk turbo but has the same plug on the end.i think whoever put in the lamba has got the wrong one thus them having to cut the wires and join them...so i will fit it and see if my mot tester is happy lol

 

What you will have fitted is a 'universal type' they are cheaper because they can be grafted on to the end of the OE loom so you dony have the expense of the OE plug, they can work very well