Injector removal
#1
Injector removal
Guys what have people found as the safest way to remove injectors from the rails. I have taken some out before but always found it rally difficul to get them out so looking for some tips on the best method to minimise the risk of damage. Is there a tool that can be bought to remove them.
#3
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
remove the cap..
turn the injector breaking the seal where it hasn't moved for a while..
turn the injector so the tail sits over the bolt hole and gentle prize up with a screwdriver
turn the injector breaking the seal where it hasn't moved for a while..
turn the injector so the tail sits over the bolt hole and gentle prize up with a screwdriver
#4
Is there any significance of aligning the tail with a bolt hole? or is it just to give you somewhere to lever on.
Last edited by Arch; 14 February 2009 at 02:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM