Power FC Help
#1
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Athens Greece
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Power FC Help
For some days now my car (98 STI) has an increased fuel consumption, i just chance the plugs and a the water temp sensor believing that was the problem but i dont see any difference. I check the sensors in the Power FC menu and i have seen that the PGS is flashing.
What is the PGS?
What is the PGS?
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Purge solenoid.. normal for it to flash.
The most likely culprit is the lambda sensor..
go to ETC ==> Function Select and scroll to the bottom most option and scroll right.. 02 Feedback press down arrow to turn the lambda sensor off and up arrow to turn it back on.. unfortunatly it ia japanese symbol so not obvious off and on.
Try it off for a tank
Simon
The most likely culprit is the lambda sensor..
go to ETC ==> Function Select and scroll to the bottom most option and scroll right.. 02 Feedback press down arrow to turn the lambda sensor off and up arrow to turn it back on.. unfortunatly it ia japanese symbol so not obvious off and on.
Try it off for a tank
Simon
#5
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Athens Greece
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
I haven't chance the maf's settings at all,
it seems that the problem is with my O2 sensor, today at the daily route to work, with the O2 feedback off the consumption decreased significantly.
it seems that the problem is with my O2 sensor, today at the daily route to work, with the O2 feedback off the consumption decreased significantly.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM